Search Term:


Home » Inventory » Decanters » Sharples

1 to 30 and Total Found: 105 Matches

Sharples P4550 vertical Super-D-Canter centrifuge, 420SS.

Max bowl speed 3250 RPM, 2500 G's, 16.75"x 49.5"ID, rated 150 PSI @ 700 F, complete with motor, gearbox, controls, seals & oil lube/seal system. Prior use: Shale oil clarification pilot plant. 1983 vintage.

photo1

Sharples P1000 Super-D-Canter centrifuge, 316 SS.

Max bowl speed 3250 RPM, 2100 G's, 10 degree conical bowl, 4.25" double lead polished conveyor, feed tube, 165:1 gearbox, torque-arm assembly, vibration isolators guards & sub-base. No motor.

photo1

Sharples P1000 Super-D-Canter centrifuge, 316 SS.

Max bowl speed 3250 RPM, 2100 G's, 10 degree conical bowl, 4.25" double lead polished conveyor, casings & base. No gearbox, motor, guards, feed tube, etc.

photo1

Sharples P1000 Super-D-Canter centrifuge, 316 SS.

Max bowl speed 3250 RPM, 2100 G's, 10 degree conical bowl, 4.25" double lead hardsurfaced conveyor, 3 HP motor 220/440/3/60/1750 RPM, 165:1 gearbox, torque-arm assembly, feed tube, guards & sub-base. Missing solids discharge head.

photo1

Sharples P5000 Sanitary Super-D-Canter centrifuge, 316SS.

Max bowl speed 3000 RPM, 316/317SS base and casings. Sanitary hogged-out cake ports, sanitary 5" single lead conveyor, grooved beach section, USDA design SS lower casing with clean-in-place spray header, 95:1 gearbox, 125 HP Reliance motor 460/3/60/1785RPM with SS sub-base 3 HP Eurodrive CIP jogging motor, SS safety guards and lube system. No control panel. Reconditioned & unused.

photo1

NEW: Sharples clone planetary gearboxes.

52:1 or 125:1 ratio, precision ground & balanced gear assemblies built under ISO 9002 standards. All parts manufactured and assembled in USA. OEM warranty.

photo1

Sharples P5400 parts:

Base with feed tube yoke & SS upper/lower casings.

photo1

Sharples PM-75,000 Super-D-Canter centrifuge, 316/317SS.

Max bowl speed 2600 RPM, 2780 G's, 360 degree cake dis- charge, 10" single lead conveyor with STC tiles & STC feed zone, half-moon plate dams, fiberglass top cover, feed tube, 95:1 gearbox, 100 HP ECB backdrive w/control lube system, vibration switch/isolators & ABC control panel (no starters). No main motor. Excellent condition

photo1

Sharples P3000 Super-D-Canter centrifuge, 316 SS.

Max bowl speed 4000 RPM, 10 degree contour bowl, hogged out cake ports, slotted liquid ports. 4.25" single lead hardsurfaced conveyor, 25 HP XP motor 230/460/3/60/1775 125:1 gearbox w/TA assembly, feed tube, guards, chutes. Mounted on 6' stand with 5 HP varispeed Moyno feed pump and 1 HP varispeed sludge discharge conveyor. Very good condition.

photo1

Sharples P1000 Super-D-Canter centrifuge, 316SS.

Max bowl speed 3250 RPM, 2100 G's, 10 degree conical bowl, 4.25" double lead hardsurfaced conveyor, 15 HP motor 380/3/50/1440 RPM, 165:1 gearbox, torque-arm assembly, feed tube, guards & sub-base. FCA UK. Excellent condition.

photo1

(2) Sharples P600 Super-D-Canter centrifuges, 316SS.

Max bowl speed 6000 RPM, 3070 G's. 2" single lead hard- surfaced conveyor, 100:1 gearbox w/torque-arm assembly and feed tube. No motor, no guards. Good condition.

photo1

Sharples P600 Super-D-Canter centrifuge, 316SS.

Max bowl speed 6000 RPM, 3070 G's. 1" single lead hard- surfaced conveyor, 7.5 HP motor 230/460/3/60/1775 RPM, 3 HP fixed speed backdrive. No gearbox, no guards. Very good condition.

photo1

Sharples P600 Super-D-Canter rotating assembly, 316SS.

Max bowl speed 6000 RPM, 3070 G's. 2" single lead hard- surfaced conveyor and feed tube. Good condition. No motor, no guards, no top cover, no gearbox.

photo1

(3) Sharples PM-75,000 Super-D-Canter centrifuges, 316SS.

Max bowl speed 2600 RPM, 2780 G's, 360 degree cake dis- charge, 10" single lead conveyor with STC tiles & STC feed zone, half-moon plate dams, fiberglass top cover, feed tube, 95:1 gearbox, 150 HP motor 460/3/60/1785 RPM 40 HP ECB backdrive w/stand, lube system, polymer feed tube, guards, vibration isolators, control panels, spare parts & tools. Prior use: Thickening WAS. 1981 vintage. Excellent condition. Rated @ 270 GPM. Spare reconditioned scroll available.

photo1

UNUSED: Sharples DS-705 conveyor only, 316/317SS.

6" single lead STC-tiled conveyor with STC tiled feed zone. Never used. Tension bar available: add $10K.

photo1

(2) Sharples DS-705 Super-D-Canter centrifuges, 316SS.

Max bowl speed 2600 RPM, 2780 G's, rated @ 270 GPM. 360 deg cake discharge, 10" single lead STC-tiled con- veyor & feed zone, half-moon plate dams, fiberglass top cover, 95:1 gearbox, 200 HP motor 460/3/60/1785 RPM, 60 HP ECB backdrive w/stand, lube system, polymer feed tube, guards, vibration isolators, control panels, spare parts & tools. Prior use: Sewerage dewatering. 1991 vintage. Excellent condition.

photo1

Sharples PC-81,000 Super-D-Canter centrifuge, 316/317 SS.

Max bowl speed 2300 RPM (1870 x G), 25" x 115" ID, hogged-out cake ports w/wear liners, 8.5" single lead STC-tiled conveyor, 125 HP motor 460/3/60/1800 RPM, 40 HP ECB backdrive w/controller, 98:1 gearbox, guards, lube system, vibration switch/isolators & control panel Very good condition. Includes rebuilt spare rotating assembly.

photo1

Sharples XM-905 Super-D-Canter centrifuge, 316SS.

Max bowl speed 2300 RPM, 3000 G's, rated @ 540 GPM, FRP top cover, 17 deg grooved beach, 360 deg cake discharge ring dam centrate discharge, 16" double lead STC-tiled conveyor, 400 HP Reliance motor 460/3/60/1800 RPM with Voith fluid coupling, no gearbox, 40 HP DC backdrive motor w/stand, lube system, vibration switch/isolators, feed tube, guards & VFD control panel. 1987 vintage. Prior use: Thickening WAS. Excellent condition.

photo1

Sharples P4600 Super-D-Canter centrifuge parts, 316SS.

Bowl hubs, bowl extension, pillow blocks, tension bar, 4.25" single lead hardsurfaced conveyor & 98:1 gearbox. Very good condition.

photo1

(2) Sharples PC-81,000 Super-D-Canter centrifuges, 316SS.

Max bowl speed 2300 RPM (1870 x G), 25" x 115" ID, 360 deg cake discharge w/wear liners, 8.5" single lead STC-tiled conveyor, 150 HP motor 460/3/60/1800 RPM, 40 HP ECB backdrive w/controller, 98:1 gearbox, guards, lube system, vibration switch/isolators & control panel Very good condition. 1977 vintage. Prior use: Sewage.

photo1

Sharples P850 vertical decanter centrifuge, 316SS.

Max bowl speed 8000 RPM, 5450 G's, 6"x 20" bowl, rated @ 220F & 50 PSI. 2" single lead hardsurfaced conveyor, 20 HP XP motor 230/460/3/60/3250 RPM, 98:1 gearbox, feed tube, guards & lube system. Very good condition.

photo1

Sharples P5000 Super-D-Canter centrifuge, 316/317SS.

Max bowl speed 3000 RPM, 3190 x G, rated at 110 GPM. Adjustable plate dams, hogged-out cake ports, straight feed nozzles, 8.5" single lead STC-tiled conveyor, 200 HP motor 460/3/60/1785 RPM, 47.5:1 gearbox, part TA guard, vibration isolators/switch unitized on sub-base. Very good condition. No belt guard, lube system, feed tube, backdrive, bowl shell and bowl extension. (parts machine)

photo1

Sharples P600 Super-D-Canter centrifuge, 316 SS.

Max bowl speed 6000 RPM, 2" single lead hardsurfaced conveyor, 96:1 gearbox, 7.5 KW motor 380/3/50/1450 RPM, 5 KW vari-speed backdrive, feed tube, guards, vibration isolators. Unitized on stand w/control panel.FCA Europe

photo1

(2) Sharples PM-38,000 Super-D-Canter centrifuges, 316SS.

Max bowl speed 4000, 3200 G's, lined cake discharge ports, liquid plate dams, 110mm single lead STC-tiled conveyor, 159:1 gearbox, 40 HP motor 460/3/60/1775 RPM, 7.5 HP ECB backdrive, guards, polymer add feed tube, vibration isolators/switch & control panel. Mounted on 3' stand. Prior use: Sewage dewatering. 1993 vintage. Very good condition.

photo1

Sharples PM-75,000 Super-D-Canter centrifuge, 316SS.

Max bowl speed 2600 RPM, 2780 G's, 360 degree cake dis- charge, 10" single lead conveyor with STC tiles & STC feed zone, half-moon plate dams, fiberglass top cover, feed tube, 95:1 gearbox, 150 HP motor 460/3/60/1785 RPM 40 HP ECB backdrive w/stand, lube system, polymer feed tube & guards. Very good condition.

photo1

(3) Sharples PM-75,000 Super-D-Canter centrifuges, 316SS.

Max bowl speed 2600 RPM, 2780 G's, 360 degree cake dis- charge, 10" single lead conveyor with STC tiles & STC feed zone, half-moon plate dams, fiberglass top cover, feed tube, 95:1 gearbox, 150 HP motor 460/3/60/1785 RPM 40 HP ECB backdrive w/stand, lube system, polymer feed tube, guards, vibration isolators. Very good condition.

photo1

Sharples P3400 Super-D-Canter centrifuge, 316SS.

Max bowl speed 4000, 3200 G's, hogged-out cake ports, ring dam liquid ports, 4.25" single lead hardsurfaced conveyor, 18.5 KW motor 380/3/50/1450 RPM, guards, 125:1 gearbox w/TA assembly, feed tube & vibration isolator. 1979 vintage. Very good condition. Prior use: Sewage. FCA Europe.

photo1

Sharples PM-35,000 Me MK2 rotating assembly only, 316SS.

Max bowl speed 3250, 2510 G's, 360 deg cake discharge w/carbide wear liners, epicentric liquid ports, 5" single lead conveyor w/STC tiles w/pillow blocks. 1985 vintage. Excellent condition. FCA Europe. 125:1 gearbox available: add $10K.

photo1

Sharples PM-30,000 Me rotating assembly only, 316SS.

Max bowl speed 3250, 2510 G's, 360 deg cake discharge w/carbide wear liners, epicentric liquid ports, pillow blocks, single lead hardsurfaced conveyor. 1985 vintage Excellent condition. FCA Europe. 52:1 or 125:1 gearbox available: add $10K.

photo1

Sharples P3000 ME Super-D-Canter centrifuge, 316SS

Max bowl speed 4000, 3200 G's, 360 deg cake discharge, epicentric liquid ports, 3" single lead polished con- veyor, 125:1 gearbox, 18.5 KW motor 380/3/50/1450 RPM, 3 KW AC backdrive, guards, vibration isolators/switch & feed tube. Excellent condition. FCA Europe.

photo1

Sharples P850 vertical decanter centrifuge, 316SS.

Max bowl speed 8000 RPM, 5450 G's, 6"x 20" bowl, rated @ 200F & 15 PSI. 2" single lead hardsurfaced conveyor, 20 HP XP motor 230/460/3/60/3250 RPM, 98:1 gearbox, feed tube, guards, lube system and XP control panel. Excellent condition.

photo1

Sharples PM-75,000 Super-D-Canter centrifuge, 316SS.

Max bowl speed 2600 RPM, 2780 G's, 360 degree cake dis- charge, 10" single lead conveyor with STC tiles & STC feed zone, half-moon plate dams, fiberglass top cover, feed tube, 95:1 gearbox, 150 HP motor 460/3/60/1785 RPM 40 HP DC backdrive w/stand, lube system, polymer feed tube, guards, vibration isolators, control panels, Prior use: Thickening WAS. 1986 vintage. Rated @ 270GPM Very good condition - backdrive is bad.

photo1

NEW: Sharples P3000 clone decanter centrifuges, 316SS.

Max bowl speed 4000, 3200 G's, 360 deg cake discharge, epicentric liquid ports, 3" single lead STC tiled con- veyor, 125:1 gearbox, driven sheave & feed tube. Never used! FCA Argentina.

photo1

(3) Sharples PM-75,000 Super-D-Canter centrifuges, 316SS.

Max bowl speed 2600 RPM, 2780 G's, 360 degree cake dis- charge, 10" single lead conveyor with STC tiles & STC feed zone, half-moon plate dams, fiberglass top cover, feed tube, 95:1 gearbox, 150 HP motor 460/3/60/1785 RPM 40 HP DC backdrive w/stand, lube system, polymer feed tube, guards & vibration isolators & control panels. Prior use: Thickening WAS. Very good condition. 1987 vintage.

photo1

Sharples PM-38,000 Super-D-Canter centrifuge, 316SS.

Max bowl speed 4000, 3200 G's, lined cake discharge ports, liquid plate dams, 110mm single lead STC-tiled conveyor, 159:1 gearbox, 40 HP motor 460/3/60/1775 RPM, 7.5 HP ECB backdrive, guards, polymer add feed tube, vibration isolators/switch & control panel. Mounted on 4' stand. Prior use: Sewage dewatering. 1995 vintage. Excellent condition.

photo1

(3) Sharples PM-95,000 Super-D-Canter centrifuges, 316SS.

Max bowl speed 2300 RPM, 3000 G's, rated @ 540 GPM, FRP top cover, 10 deg tiled beach, 360 deg cake discharge, half-moon plate dams, 15" single lead bare quasi-axial conveyor, upper/lower casings and belt guards. No motor no backdrives, no gearbox, 3 Viscotherm hydraulic pumps 2 turbines. 1980 vintage. Very good condition. Reconditioned price includes NEW 400 HP motors, 40 HP backdrives, 95:1 P300 gearboxes, all guards, chutes, lube systems and vibration switch/isolators.

photo1

Sharples P3400 decanter centrifuge, 316SS.

Max bowl speed 4000 RPM, 360 degree cake ports, grooved beach, 4.25 single lead hardsurfaced conveyor, 40 HP motor 230/460/3/60/1750 RPM, 165:1 gearbox, 7.5 HP back drive, feed tube, guards, vibration isolators/switch. 1987 vintage. Very good condition. FCA India.

photo1

Sharples P3000 decanter centrifuge, 316SS.

Max bowl speed 4000, 3200 G's, 360 deg cake discharge, epicentric liquid ports, conveyor, gearbox adapter, no gearbox, motor, belt guard and feed tube, on sub-base. Very good condition. FCA Europe.

photo1

Sharples P3400 SANITARY decanter centrifuge, 316SS.

Max bowl speed 4000 RPM, 360 degree cake ports, CIP pipes, 4.25 single lead bare conveyor, 40 HP motor 230/ 460/3/60/1750 RPM, 125:1 gearbox, 7.5 HP backdrive, feed tube, guards, vibration isolators/switch, unitized on SS stand w/control panel. Excellent condition.

photo1

(6) Sharples DS-706 Super-D-Canter centrifuges, 316SS.

Max bowl speed 2600 RPM, 2780 G's, 360 degree cake dis- charge, 10" single lead conveyor with STC tiles & STC feed zone, moon liquid plate dams, SS casings & chutes, bowl silence ring, 225 KW motor, 100 HP DC back drive w/stand, P220 95:1 gearbox, safety guards, feed tube, lube system, vibration switch/isolators and SS control panels. 1996 vintage. Excellent condition.

photo1

Sharples DS-706 Super-D-Canter centrifuge, 316SS.

Max bowl speed 2600 RPM, 2780 G's, 360 degree cake dis- charge, 10" single lead conveyor with STC tiles & STC feed zone, moon liquid plate dams, SS casings & chutes, feed tube, 95:1 gearbox, lube system, 300 HP motor 460/ 3/60/1790 RPM, backdrive stand (no motor), vibration switch, safety guards. Very good condition. 1992 vintag

photo1

Sharples P3400 decanter centrifuge, 316SS.

Max bowl speed 3250 RPM, hogged out cake ports, grooved beach, 4.25 single lead hardsurfaced conveyor, 40 HP motor 230/460/3/60/1750 RPM, 125:1 gearbox, 15 HP back- drive, feed tube, guards, vibration isolators/switch & controls. Good condition.

photo1

Sharples P600 food grade Super-D-Canter centrifuge, 316SS.

Max bowl speed 6000 RPM, 3070 G's. 2" single lead hard- surfaced conveyor, 7.5 HP motor 230/460/3/60/1775 RPM, 2 HP backdrive w/VFD, low-torque gearbox, guards, feed tube and controller unitized on a common base. 1969 vintage. Reconditioned w/mechanical warranty. Stand available - add $5000

photo1

(6) Sharples PM-95,000 Super-D-Canter centrifuges, 316SS.

Max bowl speed 2000 RPM, 2270 G's, rated @ 540 GPM, FRP top cover, 6 deg tiled beach, 360 deg cake discharge, half-moon plate dams, 15" single lead STC-tiled quasi- axial conveyor, 225 KW Reliance motor 460/3/60/1800 RPM w/Voith fluid coupling, 95:1 gearbox, 60 HP backdrive motor w/stand, lube system, vibration switch/isolators, feed tube, guards & control panel. Excellent condition.

photo1

Sharples P5400-BD3 Super-D-Canter centrifuge, 316/317SS.

Max bowl speed 3000 RPM, BD cone design, 360 deg cake discharge, ring dams, 8.5" single lead hardsurfaced con veyor, base & casing. No motor, no gearbox, no sheaves. No lube system, no feed tube, no guards, no controls. Excellent condition.

photo1

Sharples PM-81,000 Super-D-Canter centrifuge, 316SS.

Max bowl speed 2300 RPM (1870 x G), 25" x 115" ID, hogged-out cake ports w/wear liners, 8.5" single lead STC-tiled conveyor, 125 HP motor 480/3/60/1800 RPM, 30 HP ECB backdrive, 98:1 gearbox, guards, lube system, vibration switch/isolators. Unitized on oilfield skids. Fully integrated Allen-Bradley control systems with PLC HMI, variable speed main drive, backdrive, 150 GPM posi tive displacement feed pump & 8' solids screw conveyor. Sludge flow meter, 10' high centrifuge stand w/railingstools, manuals & spare parts. Very good condition.

photo1

Sharples P5400-BD Super-D-Canter centrifuge, 316/317SS.

Max bowl speed 3000 RPM, BD cone design, 360 deg cake discharge, ring dams, 8.5" single lead hardsurfaced con veyor, base & casing. No motor, no gearbox, no sheaves. No lube system, no feed tube, no guards, no controls. Excellent condition.

photo1

Sharples XM-706 Super-D-Canter centrifuge, 316SS.

Max bowl speed 2600 RPM, 2780 G's, 360 degree cake dis- charge, 10" single lead conveyor with STC tiles & STC feed zone, moon liquid plate dams, SS casings & chutes, feed tube, 95:1 gearbox, lube system, 200 HP motor 460/ 3/60/1790 RPM, 60 HP DC backdrive & stand, vibration switch, guards and control panel. Excellent condition. Prior use: Thickening WAS.

photo1