Search Term:


Home » Inventory » Other

Chip Wringers

Process Equipment

51 to 80 and Total Found: 72 Matches

NEW: Nobles 12 x 12 Turbo 22 perforate basket dryer, SS.

Max bowl speed 725 RPM, 89 G's, 75 lbs capacity. 2 HP magnetic disc brake motor 230/460/3/60/1725 RPM, SS basket (your choice of mesh size), cast iron base for greater stability & less vibration, limit switch, fume sensor & junction box. Allow 8 weeks delivery. 2000/4000W

photo1

Alfa-Laval plate heat exchanger, model M15-MFM8.

580 sq ft, 316SS, gasketed. Max flow rate 2000 GPM. 89 plates, 24" wide, rated at 150 PSI @ 210F. (2) 6" inlets, (2) 6" outlets. Expandable CS frame. Built 2003.

photo1

Shriver 36" filter press, cast iron plates & CS frame.

24 plates, 342 sq ft capacity, 4 eye closed delivery, 1 head plate, 1 tail plate, 1 adapter plate, 2" cake thickness, 100 PSI max operating pressure, max thrust 60 tons, hydroclosure & hydraulic pump. Very good cond.

photo1

(2) FT CT6-40 Centritherm evaporators, 316SS.

Thin-film, single-effect, spinning cone evaporators designed for highly viscous slurry to 20,000cP. Rated @ 800 LPH (12-65 Brix). Complete w/frame & pump. Very good condition. FCA Mexico.

photo1

De Laval 26 x 18 chip wringer.

Max bowl speed 1050 RPM, 440 G's, 5 cu ft capacity, max load 500 lbs. 10 HP motor 230/460/3/60/1755 RPM, Reeves vari-drive 2.25:1 ratio, brake and controls. 1951 vintage. Very good condition.

photo1

Reclamet 30" chip processing system.

30" diameter chip wringer with auger conveyor, feed hopper, control panel, bucket elevator, dumping lift. Excellent condition.

photo1

Alfa-Laval Complete 4 TPH Olive Oil Processing Line.

Fully automated plant includes (2) Alfa-Laval UVPX 510 separators, Alfa-Laval NX 934 decanter, (2) inclined belt conveyors, (2) hydraulic super washers, SS auger, hammer mills, (3) horizontal jacketed mix/blend vessels plate heat exchanger with pump and controls. 1996 vint. Excellent

photo1

Barrett 402-E chip spinner.

Chip pan 23" x 15", 2.1 cu ft capacity, max 20 loads/hr max load weight 225 lbs, running speed 1200 RPM, 6 HP motor 230/460/3/60/1775 RPM, lid lock, brake, 1 basket. 1974 vintage. Good working condition.

photo1

Barrett 152-E carrier type oil extractor.

Max bowl speed 1200 RPM, 18"dia x 9"deep, rated @ 16 cu ft/hr, chip pan capacity 2/3 bushel (0.8 cu ft), (20) 100 LB loads/hr, 2.5 HP 2-speed motor 230/3/60/1200 RPM Excellent running condition.

photo1

Alfa-Laval H7RC 12,500 LPH milk & cream pasteurizing plant.

Complete skid mounted pastuerization unit, 1992 vintage Includes closed balance tank, centrifugal feed pump, flow transmitter, plate heat exchanger with integrated cream pastuerizer, PLC control panel with touch screen and CIP/SIP. Westfalia MSA 160-01-076 separator, 5000 L cream tank

photo1

Barrett 401-E spindle post chip spinner oil extractor.

Chip pan 23" x 15", 2.1 cu ft capacity, max 20 loads/hr max load weight 225 lbs, running speed 1200 RPM, 6 HP motor 230/460/3/60/1775 RPM, lid lock, brake, 5 baskets jib crane, 45 gal settling tank and control panel. Excellent condition. Manuals included.

photo1

GEA Niro spray drying plant for dried milk powder, SS.

GEA Niro Rewet Agglomerator rated @ 6 TPH of spray drie skim or whole milk powder. Can also dry whey concentrat and various other products. Includes (2) vibrating fluidized beds, drying chamber with explosion doors, blowers, motors, pumps, piping, controls, etc. Uniform si

photo1

Barrett 1100-E carrier type oil extractor.

Max bowl speed 900 RPM, 30"dia x 14"deep, rated @ 68 cu ft/hr, chip pan capacity 4.5 cuft, (15) 425 LB loads/hr 10 HP motor 230/460/3/60, dynamic brake, timer control with lid locked until bowl comes to a stop. 1 basket. Very good condition.

photo1

Sperry New Holland K-23 Centrifugal Dryer.

Max basket speed 825 RPM, capacity 75 lbs, 12x12 basket

photo1

Barrett 401-E spindle post chip spinner oil extractor.

Chip pan 23" x 15", 2.1 cu ft capacity, max 20 loads/hr

photo1

Nobles 18 x 18 centrifugal dryer.

Max bowl speed 1200 RPM, 18"dia x 18"deep, rated @ 32cu

photo1

New Holland K-90 18" x 18" chip wringer, SS.

Max bowl speed 625 RPM, rated @ 150 lbs/batch, lid lock

photo1

Brown 303 double screw pulper/finisher press, SS.

Screw finishers are very well suited for the citrus

photo1

Tetra Pak C10-SR 45,000 LPH cheese milk pasteurizing plant.

Complete pastuerization unit for cheese milk with whey

photo1

Mobile Sludge Dewatering Plant, plug & play.

Includes (2) HH-5500 decanter centrifuges w/VFD panels,

photo1

Barrett Spintech 301 chip wringer.

Max bowl speed 1200 RPM, 16" x 9" extractor, rated @

photo1