Search Term:


Home » Inventory » Other » Chip-wringers

1 to 30 and Total Found: 33 Matches

NEW: Nobles 23 x 18 Turbo 231 perforate basket dryer, SS.

Max bowl speed 350 RPM, 40 G's, 300 lbs capacity. 5 HP XP magnetic disc brake motor 230/460/3/60/1725RPM, SS basket (your choice of mesh size), cast iron base for greater stability & less vibration, limit switch, fume sensor & junction box. Allow 8 - 10 weeks ARO.

photo1

Tolhurst 40" Center-Slung chip wringer.

Max bowl speed 700 RPM, capacity 8.6 cu ft, max load 600 lbs, 5 HP motor 220/440/3/60, brake, lock-down lid. 1 basket. Good working condition.

photo1

Tolhurst 26" Minute Man chip wringer - no basket.

Max bowl speed 1085 RPM, 440 G's, 2.85 cu ft capacity, max load 250 lbs. 3 HP motor 230/460/3/60/1775 RPM, brake and controls. No basket! Good condition.

photo1

Tolhurst 26" late model chip wringer - no basket.

Max bowl speed 1085 RPM, 440 G's, 2.85 cu ft capacity, max load 250 lbs. 3 HP motor 230/460/3/60/1775 RPM, brake and controls. No basket! Very good condition.

photo1

Heine 30" chip wringer.

Max bowl speed 1085 RPM, 440 G's, 2.85 cu ft capacity, max load 350 lbs. 3 HP motor 230/460/3/60/1775 RPM, brake and controls. 1970s vintage. Good condition.

photo1

Fleshe 30" chip wringer.

Max bowl speed 1085 RPM, 440 G's, 2.85 cu ft capacity, max load 350 lbs. 3 HP motor 230/460/3/60/1775 RPM, brake and controls. 1970s vintage. Good condition.

photo1

NEW: Barrett 402-GA 14 x 20 automated galvanizer.

Max bowl speed 900 RPM, 14" diameter x 20" deep basket, rated @ 100 lbs/load, 60 loads/hour. Single voltage (specify) direct drive motor, timer, safety interlock, pneumatically controlled brake and lid, vibration damp- eners, NEMA 12 PLC control panel with motor starter. Designed to spin excess molten zinc off hot dip parts. Option: Top hat lid, removable carrier adapter and 14" diameter basket to accomodate spinning of 36" long rods add: $5500. Allow 12 weeks ARO for delivery.

photo1

NEW: Barrett 402-GA 18 x 20 automated galvanizer.

Max bowl speed 900 RPM, 18" diameter x 20" deep basket, rated @ 120 lbs/load, 67 loads/hour. Single voltage (specify) direct drive motor, timer, safety interlock, pneumatically controlled brake and lid, vibration damp- eners, NEMA 12 PLC control panel with motor starter. Designed to spin excess molten zinc off hot dip parts. Option: Top hat lid, removable carrier adapter and 18" diameter basket to accomodate spinning of 36" long rods add: $6000. Allow 12 weeks ARO for delivery.

photo1

NEW: Barrett 402-GA 20 x 20 automated galvanizer.

Max bowl speed 900 RPM, 20" diameter x 20" deep basket, rated @ 120 lbs/load, 65 loads/hour. Single voltage (specify) direct drive motor, timer, safety interlock, pneumatically controlled brake and lid, vibration damp- eners, NEMA 12 PLC control panel with motor starter. Designed to spin excess molten zinc off hot dip parts. Option: Top hat lid, removable carrier adapter and 20" diameter basket to accomodate spinning of 36" long rods add: $6500. Allow 12 weeks ARO for delivery.

photo1

NEW: Barrett 402-G 14 x 20 standard galvanizer.

Max bowl speed 900 RPM, 14" diameter x 20" deep basket, rated @ 100 lbs/load, 60 loads/hour. Single voltage (specify) direct drive motor, timer, safety interlock, brake and lid, vibration dampeners, NEMA 12 PLC control panel with motor starter. Allow 12 weeks for delivery. Designed to spin excess molten zinc off hot dip parts. Option: Top hat lid, removable carrier adapter and 14" diameter basket to accomodate spinning of 36" long rods add: $5500. Motor cooling blower add: $3000.

photo1

NEW: Barrett 402-G 18 x 20 standard galvanizer.

Max bowl speed 900 RPM, 18" diameter x 20" deep basket, rated @ 120 lbs/load, 67 loads/hour. Single voltage (specify) direct drive motor, timer, safety interlock, brake and lid, vibration dampeners, NEMA 12 PLC control panel with motor starter. Allow 12 weeks for delivery. Designed to spin excess molten zinc off hot dip parts. Option: Top hat lid, removable carrier adapter and 14" diameter basket to accomodate spinning of 36" long rods add: $5500. Motor cooling blower add: $3000.

photo1

NEW: Barrett 402-G 20 x 20 standard galvanizer.

Max bowl speed 900 RPM, 20" diameter x 20" deep basket, rated @ 120 lbs/load, 65 loads/hour. Single voltage (specify) direct drive motor, timer, safety interlock, brake and lid, vibration dampeners, NEMA 12 PLC control panel with motor starter. Allow 12 weeks for delivery. Designed to spin excess molten zinc off hot dip parts. Option: Top hat lid, removable carrier adapter and 14" diameter basket to accomodate spinning of 36" long rods add: $5500. Motor cooling blower add: $3000.

photo1

NEW: Ford New Holland K-11 Centrifugal Dryer.

Max basket speed 1100 RPM, capacity 7 lbs, 1/8 HP motor 120V/1ph/50/60Hz, 600W electric radiant heater, 6" x 6" basket in carbon steel, stainless steel or polypropylen SS & CS basket have 1/16" perforations, poly basket has 3/16" perfs & can be fitted with a SS 40 mesh liner. Option: Automatic reset timer - add $750. Allow 3-6 wks Without heater - deduct $300.

photo1

NEW: Ford New Holland K-24 Centrifugal Dryer.

Max basket speed 825 RPM, capacity 75 lbs, 1 HP motor 230V/3ph/50/60Hz, 600W electric radiant heater, 12 x 12 basket in carbon steel, stainless steel or polypropylen various mesh screens or perforation sizes to choose frm Mechanical braking system, safety interlock switch and reversible control. Brand new with OEM warranty. Option: Variable speed - add $5000 (incl. soft start) Option: Soft start - add $3200, Temp control -add $1500 Option: Automatic reset timer - add $1600 Allow 5-7 wksWithout heat - deduct $800.

photo1

Tolhurst 40" Center-Slung chip wringer.

Max bowl speed 700 RPM, capacity 8.6 cu ft, max load 600 lbs, 7.5 HP motor 220/440/3/60, brake, lock-down lid and 1 basket. Very good condition.

photo1

(2) Barrett 402-WD washer-dryers.

Basket 24" x 14", 3 cu ft capacity, max 20 loads/hr, max load weight 225 lbs, running speed 900 RPM, 6 HP motor 230/460/3/60/1775 RPM, lid lock, brake, 1 basket. 1989 & 1993 vintage. Good rebuildable condition.

photo1

Barrett 1100-WD washer-dryer.

Basket 30" x 15", 5 cu ft capacity, max 20 loads/hr, max load weight 425 lbs, running speed 900 RPM, 10 HP motor 230/460/3/60/1775 RPM, lid lock, brake, 1 basket. 1993 vintage. Very good condition.

photo1

Barrett 1100-E carrier type oil extractor.

Max bowl speed 900 RPM, 30"dia x 14"deep, rated @ 68 cu ft/hr, chip pan capacity 4.5 cuft, (15) 425 LB loads/hr 10 HP motor 230/460/3/60, dynamic brake, timer control with lid locked until bowl comes to a stop. 3 baskets. 1986 vintage. Very good condition.

photo1

Cepa GZ 850 33" chip wringer.

Max bowl speed 750 RPM, capacity 230 L, max load 120 kg 5 HP motor 220/440/3/60, brake, lock-down lid. 1 basket 1972 vintage. Excellent condition.

photo1

ATM/DeLaval 48" chip wringer/oil extractor.

Max bowl speed 600 RPM, 15.7 cuft capacity per load, 7.5 HP motor 230/460/3/60/1775 RPM, pushbutton control, 1 basket, lid lockout & brake. Very good condition.

photo1

NEW: Nobles 6 x 6 Turbo 6 perforate basket dryer, SS.

Max bowl speed 1075 RPM, 98 G's, 7 lbs capacity. .25 HP magnetic disc brake motor 115/1/60/1725 RPM, SS basket (your choice of mesh size), cast iron base for greater stability & less vibration, limit switch, fume sensor & junction box. Allow 6-8 weeks delivery. 600W heater available at additional cost.

photo1

NEW: Nobles 12 x 12 Turbo 22 perforate basket dryer, SS.

Max bowl speed 725 RPM, 89 G's, 75 lbs capacity. 2 HP magnetic disc brake motor 230/460/3/60/1725 RPM, SS basket (your choice of mesh size), cast iron base for greater stability & less vibration, limit switch, fume sensor & junction box. Allow 8 weeks delivery. 2000/4000W steam heater available at additional cost.

photo1

De Laval 26 x 18 chip wringer.

Max bowl speed 1050 RPM, 440 G's, 5 cu ft capacity, max load 500 lbs. 10 HP motor 230/460/3/60/1755 RPM, Reeves vari-drive 2.25:1 ratio, brake and controls. 1951 vintage. Very good condition.

photo1

Reclamet 30" chip processing system.

30" diameter chip wringer with auger conveyor, feed hopper, control panel, bucket elevator, dumping lift. Excellent condition.

photo1

Barrett 402-E chip spinner.

Chip pan 23" x 15", 2.1 cu ft capacity, max 20 loads/hr max load weight 225 lbs, running speed 1200 RPM, 6 HP motor 230/460/3/60/1775 RPM, lid lock, brake, 1 basket. 1974 vintage. Good working condition.

photo1

Barrett 152-E carrier type oil extractor.

Max bowl speed 1200 RPM, 18"dia x 9"deep, rated @ 16 cu ft/hr, chip pan capacity 2/3 bushel (0.8 cu ft), (20) 100 LB loads/hr, 2.5 HP 2-speed motor 230/3/60/1200 RPM Excellent running condition.

photo1

Barrett 401-E spindle post chip spinner oil extractor.

Chip pan 23" x 15", 2.1 cu ft capacity, max 20 loads/hr max load weight 225 lbs, running speed 1200 RPM, 6 HP motor 230/460/3/60/1775 RPM, lid lock, brake, 5 baskets jib crane, 45 gal settling tank and control panel. Excellent condition. Manuals included.

photo1

Barrett 1100-E carrier type oil extractor.

Max bowl speed 900 RPM, 30"dia x 14"deep, rated @ 68 cu ft/hr, chip pan capacity 4.5 cuft, (15) 425 LB loads/hr 10 HP motor 230/460/3/60, dynamic brake, timer control with lid locked until bowl comes to a stop. 1 basket. Very good condition.

photo1

Sperry New Holland K-23 Centrifugal Dryer.

Max basket speed 825 RPM, capacity 75 lbs, 12x12 basket

photo1

Barrett 401-E spindle post chip spinner oil extractor.

Chip pan 23" x 15", 2.1 cu ft capacity, max 20 loads/hr

photo1

Nobles 18 x 18 centrifugal dryer.

Max bowl speed 1200 RPM, 18"dia x 18"deep, rated @ 32cu

photo1

New Holland K-90 18" x 18" chip wringer, SS.

Max bowl speed 625 RPM, rated @ 150 lbs/batch, lid lock

photo1

Barrett Spintech 301 chip wringer.

Max bowl speed 1200 RPM, 16" x 9" extractor, rated @

photo1