Max bowl speed 3350 RPM, 2950 x G, 470 x 1998mm (18.5 x 78.6") bowl ID, rated @ 45,000 LPH. 8.5 degree beach angle, 150mm single lead TC spray conveyor, 37 KW motor 380/3/50/2950 RPM with fluid clutch

Max bowl speed 5200 RPM, 3500 x G, 9 x 22" bowl ID, rated @ 1200 LPH. 5.5 KW motor 400/3/50/2915 RPM, planetary gearbox, 2 KW backdrive, sludge scraper, feed tube, guards, vibration isolators, stand a

Max bowl speed 4100 RPM, 3318 x G, rated @ 22 GPM max, 14 x 36" bowl ID. 11 KW motor 380/3/50/1450 RPM, planetary gearbox, feed tube, guards and vibration isolators on legs with control panel. 1999 vi

Max bowl speed 4800 RPM, 3218 x G, 250 x 1000mm bowl ID. 100mm single lead hardsurfaced conveyor, 11 KW motor 460/3/60/1750 RPM, 97:1 1.5 kNm gearbox, ECB backdrive, feed tube, guard, vibration isolat

Max bowl speed 3500 RPM, 2230 x G, 320 x 576mm bowl ID. 360 degree wear protected cake ports, ring dam liquid ports, 70mm single lead hardsurfaced conveyor, 11 KW motor 380/440/3/50/60, gearbox with t

37 KW motor 380/660/3/50/1485 RPM. Very good condition. Shaft 60mm dia x 140mm long. Located in Europe.

30 KW motor 380/660/3/50/1470 RPM. No nameplate. Shaft 60mm dia x 140mm long. Rewound, new bushings/bearings, painted. Located in Europe.

CMG 37 KW motor 380/660/3/50/1485 RPM and 440/3/60/1782 RPM. Shaft 60mm dia x 140mm long. Rewound, new bushings/bearings, painted. Located in Europe.

Rated @ 400 GPM, 304SS epoxy coated vessel, 304SS scrapers, acetyl chain, chemical pumps, floc tube, air generator, on-board chemical tanks, sludge holding tank and NEMA 4X control panel. 1 year OEM w

Dished top & bottom, rated @ 40 PSI full vacuum internal Allegheny Bradford U-tube heat exchanger, 18" x 28" rated @ 150 PSI @ 350F shell and tubes. 2001 vintage.

47" W x 120" L x 48" H. 1999 vintage. Very good condition.

Plate heat exchanger with 3 sections (heating, cooling and regeneration), rated @ 600 GPH (2271 LPH, 6500 PPH) with balance tank, holding tube assembly, hot water make-up system, booster and circulati

Thin-film, single-effect, spinning cone evaporator designed for highly viscous slurry to 20,000cP. Rated @ 800 LPH (12-65 Brix). Includes 3 column pre-evaporator and tower, A/L P2-HL plate heat exchan

Screw finishers are very well suited for the citrus juice industry. They separate the fibrous pulp from the liquid stream. Max speed 525 RPM, rated at 250 GPM. Cylinder screen chamber: 12" dia x 78" L

Rated 50psi/FV @ 281F internal, 150psi/FV @300F jacket. Dimple jacket is 304SS on shell and bottom head. Vessel is 6'4" diameter x 5'7" straight side w/welded dished top, slight cone bottom, 0.25" thi

24" diameter x 24" length cylindrical, manway, site glass, tri-clamp outlet with butterfly valve for whey, interior baffles and brake motor 3 phase, 230/460 volt, on an A-frame mount. 2003 vintage. Ve

Cylindrical, manway, site glass, tri-clamp outlet with butterfly valve for whey, interior baffles and brake motor 3 phase, 230/460 volt, on an A-frame mount. 12 week delivery.

Cylindrical, manway, site glass, tri-clamp outlet with butterfly valve for whey, interior baffles and brake motor with VFD, on an A-frame mount. 12 week delivery.

Dual concave screen bed, actuated screen compression system, super G3 integrated vibratory motors. Very good condition. Located in India.

Plate heat exchanger with 3 sections (heating, cooling and regeneration), rated @ 600 GPH (2271 LPH). Complete with balance tank, holding tube assembly, hot water make-up system, booster and circulati