NEW: 400 GPM Dissolved Air Flotation System, 304SS.
Rated @ 400 GPM, 304SS epoxy coated vessel, 304SS scrapers, acetyl chain, chemical pumps, floc tube, air generator, on-board chemical tanks, sludge holding tank and NEMA 4X control panel. 1 year OEM w
NEW: 20 GPM Dissolved Air Flotation System, 304SS.
Rated @ 20 GPM max, 304SS epoxy coated vessel, 304SS scrapers, acetyl chain, chemical pumps, floc tube, air generator, on-board chemical tanks, sludge holding tank and NEMA 4X control panel. 1 year OE
NEW: 200 GPM Dissolved Air Flotation System, 304SS.
Rated @ 200 GPM max, 304SS epoxy coated vessel, 304SS scrapers, acetyl chain, chemical pumps, floc tube, air generator, onboard chemical tanks, sludge holding tank and NEMA 4X control panel. 1 year OE
Alfa-Laval CT-6 Centritherm evaporator, 316SS.
Thin-film, single-effect, spinning cone evaporator designed for highly viscous slurry to 20,000cP. Rated @ 800 LPH (12-65 Brix). Includes 3 column pre-evaporator and tower, A/L P2-HL plate heat exchan
Alfa-Laval CT-6 Centritherm evaporator, 316SS.
Thin-film, single-effect, spinning cone evaporator designed for highly viscous slurry to 20,000cP. Rated @ 800 LPH (12-65 Brix). Includes A/L P2-HL plate heat exchanger, A/L PAR22 PHE, (2) A/L PAR01 P
(2) FT CT6-40 Centritherm evaporators, 316SS.
Thin-film, single-effect, spinning cone evaporators designed for highly viscous slurry to 20,000cP. Rated @ 800 LPH (12-65 Brix). Complete with frame, heat exchanger and pump. 1981 vintage. Very good
(2) T & C Stainless 120 liter SS reactors on CIP skid.
Dished top & bottom, rated @ 40 PSI full vacuum internal Allegheny Bradford U-tube heat exchanger, 18" x 28" rated @ 150 PSI @ 350F shell and tubes. 2001 vintage.
Westfalia 37 KW motor.
37 KW motor 380/660/3/50/1485 RPM. Very good condition. Shaft 60mm dia x 140mm long. Located in Europe.
Westfalia 30 KW motor, reconditioned.
30 KW motor 380/660/3/50/1470 RPM. No nameplate. Shaft 60mm dia x 140mm long. Rewound, new bushings/bearings, painted. Located in Europe.
Westfalia 37 KW motor, reconditioned.
CMG 37 KW motor 380/660/3/50/1485 RPM and 440/3/60/1782 RPM. Shaft 60mm dia x 140mm long. Rewound, new bushings/bearings, painted. Located in Europe.
Westfalia Loehr 26 KW (35 HP) motor.
26 KW (35 HP) motor 230/460/3/60 with SS cover. Good used condition. Will be test run before shipping. Can be used with a VFD or regular starter.
NEW: Westfalia Loehr 26 KW (35 HP) motor.
26 KW (35 HP) motor 230/460/3/60. VDF/Delta duty. Brand new. Delivery: 5-7 days. Stainless steel cover: add $7,500.
Westfalia Loehr 45 KW (60 HP) motor.
45 KW (60 HP) motor 415/3/50/88A/1470 RPM, water-cooled. Shaft 60mm diameter x 15 cm long. Came from Westfalia KDB 45-02-076 quark separator. 1999 vintage. Very good condition. Located in Europe.
NEW: Brown 303 clone double screw pulper/finisher presses, SS.
Screw finishers are very well suited for the citrus juice industry. They separate the fibrous pulp from the liquid stream. Max speed 525 RPM, rated at 250 GPM. Cylinder screen chamber: 12" dia x 78" L
FKC HX-550 screw press for fish dewatering, 304SS.
Rated @ 1000-3000 KPH, dehydrated moisture 81.5%, screens 1.5 x 2.8p x 1.0t / 1.2 x 2.3 x 1.0 / 1.0 x 2 x 0.8 with hopper. Setup for Sumitomo drive. Prior use: Surimi. 1989 vintage. Excellent conditio
FKC HX-550 screw press for fish dewatering, 304SS & CS frame.
Rated @ 1000-3000 KPH, dehydrated moisture 81.5%, screens 1.5 x 2.8p x 1.0t / 1.2 x 2.3 x 1.0 / 1.0 x 2 x 0.8 with hopper. Setup for Sumitomo drive. Prior use: Surimi. 1990 vintage. Excellent conditio
Hamilton Kettle 1500 G (5000 L) sanitary reactor, 316 SS.
Rated 50psi/FV @ 281F internal, 150psi/FV @300F jacket. Dimple jacket is 304SS on shell and bottom head. Vessel is 6'4" diameter x 5'7" straight side w/welded dished top, slight cone bottom, 0.25" thi
Fluid Systems D18XCL series 500 shaker screen.
47" W x 120" L x 48" H. 1999 vintage. Very good condition.
Manzini Comaco TE-15 Juice Turbo Extractor, SS.
Rated at 4500 KPH. 30 KW motor 380/3/50/965 RPM. Prior use: Tomato juice. Very good condition. Located in Bangladesh.
