These 3 panel linear motion shale shakers are powered by two Super G integrated vibratory motors which enable the FLC-503 to operate at a continuous 7.0 x G. This maximizes the conveyance rate of the

24" diameter x 24" length cylindrical, manway, site glass, tri-clamp outlet with butterfly valve for whey, interior baffles and brake motor 3 phase, 230/460 volt, on an A-frame mount. 2003 vintage. Ve

Cylindrical, manway, site glass, tri-clamp outlet with butterfly valve for whey, interior baffles and brake motor 3 phase, 230/460 volt, on an A-frame mount. 12 week delivery.

Cylindrical, manway, site glass, tri-clamp outlet with butterfly valve for whey, interior baffles and brake motor with VFD, on an A-frame mount. 12 week delivery.

Dual concave screen bed, actuated screen compression system, super G3 integrated vibratory motors. Very good condition. FCA India.

Plate heat exchanger with 3 sections (heating, cooling and regeneration), rated @ 600 GPH (2271 LPH). Complete with balance tank, holding tube assembly, hot water make-up system, booster and circulati

Rated @ 20 GPM max, 304SS epoxy coated vessel, 304SS scrapers, acetyl chain, chemical pumps, floc tube, air generator, on-board chemical tanks, sludge holding tank and NEMA 4X control panel. 1 year OE

Rated @ 1000-3000 KPH, dehydrated moisture 81.5%, screens 1.5 x 2.8p x 1.0t / 1.2 x 2.3 x 1.0 / 1.0 x 2 x 0.8 with hopper. Setup for Sumitomo drive. Prior use: Surimi. 1989 vintage. Excellent conditio

Rated @ 1000-3000 KPH, dehydrated moisture 81.5%, screens 1.5 x 2.8p x 1.0t / 1.2 x 2.3 x 1.0 / 1.0 x 2 x 0.8 with hopper. Setup for Sumitomo drive. Prior use: Surimi. 1990 vintage. Excellent conditio

Thin-film, single-effect, spinning cone evaporator designed for highly viscous slurry to 20,000cP. Rated @ 800 LPH (12-65 Brix). Includes A/L P2-HL plate heat exchanger, A/L PAR22 PHE, (2) A/L PAR01 P

Rated @ 200 GPM max, 304SS epoxy coated vessel, 304SS scrapers, acetyl chain, chemical pumps, floc tube, air generator, onboard chemical tanks, sludge holding tank and NEMA 4X control panel. 1 year OE

24" diameter x 24" length cylindrical, manway, site glass, tri-clamp outlet with butterfly valve for whey, interior baffles and brake motor 3 phase, 230/460 volt, on an A-frame mount. 12 week delivery

Separates olive pits from pomace up to 4 TPH. 23 KW motor 380/3/50. Excellent condition. FCA Europe.

Thin-film, single-effect, spinning cone evaporators designed for highly viscous slurry to 20,000cP. Rated @ 800 LPH (12-65 Brix). Complete with frame, heat exchanger and pump. 1981 vintage. Very good

Max bowl speed 600 RPM, rated @ 120 GPM on primary juice, 85 GPM on pulp wash. 25 motor 230/460/3/60/1770 RPM. New set of 0.0020" screens installed, manual spray rings. Good operating condition. Will

26 KW (35 HP) motor 230/460/3/60 with SS cover. Good used condition. Will be test run before shipping. Can be used with a VFD or regular starter.

26 KW (35 HP) motor 230/460/3/60. VDF/Delta duty. Brand new. Delivery: 5-7 days. Stainless steel cover: add $7,500.

2014 vintage. FCA Europe.

Winterizing, bleaching, deodorizing, crystallizing and filtering. Includes Westfalia RSA 80-01-076 separator with spare bowl and RSA 150-01-076 separator, (2) boosters, (2) condensers, (2) ejectors, (

Crush includes (3) Dupps presses, cooker, hammer mill and meal storage. Refinery includes Alfa-Laval PX 30 degumming separator, Chinese made decanter and wash water centrifuges for bleaching and deodo